IP710-X60高精度電流/氣壓傳感器 美國omega
高精度I/P傳感器
電子空氣壓力控制
IP710 Series
高精度I/P傳感器
電子空氣壓力控制
高精度氣動控制span 0.1 %
NEMA 4X（IP - 65）enclosure
4到20 mA回路powered
管道或wiring DIN連接器
墻面板的安裝，或管standard
可選的kit DIN軌道安裝
輸入/輸出端口在前面和back
外部零和跨度調整
The IP710 series l/P transducers are a series of compact high accuracy electronic pressure regulators that convert a 4 to 20 mA signal to a proportional pneumatic output. Utilizing internal solid-state feedback circuitry, the IP710 provides precise, stable pressure outputs to final control elements. Immunity to the effects of vibration or mounting position, high tolerance to impure air, and low air consumption make this unit ideal for use in demanding applications.
Typically these units are used for pneumatic applications that require electronic pressure control of valve actuators, pneumatic valve positioners, air cylinders, clutches, brakes, dampers, louvres, and pumps. Original equipment applications include manufacturers of machinery for grinding or polishing, welding, dispensing, web tensioning, semiconductor manufacturers, automated assembly, conveying, leak testing, food processing and painting to name a few.
Multiple choices for wiring and porting simplify installation and decrease the time required to do so. In addition to standard wall, panel or pipe mounting, an optional DIN rail mounting kit is available.
Model No. Range
(psi) Accuracy Impedance Air
Consumption Pressure
Supply
(psi) Flow
Capacity
IP710-X15 3 to 15 ±0.1% span 10 kΩ 1.5 scfh @
mid-range 20 to 100 4.5 scfm @ 25 psig
12 scfm @ 100 psig
IP710-X17 1 to 17 ±0.1% span 10 kΩ 1.5 scfh @
mid-range 22 to 100 4.5 scfm @ 25 psig
12 scfm @ 100 psig
IP710-X27 3 to 27 ±0.1% span 10 kΩ 1.5 scfh @
mid-range 32 to 100 4.5 scfm @ 25 psig
12 scfm @ 100 psig
IP710-X30 6 to 30 ±0.1% span 10 kΩ 1.5 scfh @
mid-range 35 to 100 4.5 scfm @ 25 psig
12 scfm @ 100 psig
IP710-X60 2 to 60 ±0.1% span 10 kΩ 4.5 scfh @
mid-range 65 to 130 20 scfm @ 130 psig
IP710-X100 2 to 100 ±0.1% span 10 kΩ 4.5 scfh @
mid-range 105 to 130 20 scfm @ 130 psig
SPECIFICATIONS
Agency Approvals: FM and CSA Intrinsically Safe
IP710: Class I,II,III, Div. 1, Groups C, D, E, F & G
IP710-D: Class I, Div. 1, Groups C & D
(output pressure, does not affect rating)
Input Signal: 4 to 20 mA loop powered
Deadband: 0.02% of span
Supply Pressure Sensitivity: 0.1% of span per psi (±0.02% for zero based units)
RFI/EMI Effect: 0.5% of span change in output pressure per En 61000-4-3:1998,
Amendment 1, Performance Criterion A
Temperature Limits: -40 to 70°C (-40 to 160°F)
Media: Clean, dry, oil-free, instrument air, filtered to 40 micron
Pressure Ports: ? NPT female
Electrical Connections: ? NPT female conduit or DIN 43560 connector
Mounting: Direct wall, panel, 1?" pipe, or optional DIN rail
Materials:
Housing: Chromate treated aluminum with epoxy paint, NEMA-4X (IP65) rated
Elastomers: Buna-N
Trim: Stainless Steel and zinc plated brass
Weight: 370 g (0.8 lb)
產品型號/產品描述
IP710-X15 3 to 15 psi range, Conduit Termination
IP710-X27 3 to 27 psi range, Conduit Termination
IP710-X30 6 to 30 psi range, Conduit Termination
IP710-X17 1 to 17 psi range, Conduit Termination
IP710-X60 2 to 60 psi range, Conduit Termination
IP710-X100 2 to 100 psi range, Conduit Termination
IP710-X15-D 3 to 15 psi range, DIN 43650 Connector
IP710-X27-D 3 to 27 psi range, DIN 43650 Connector
IP710-X30-D 6 to 30 psi range, DIN 43650 Connector
IP710-X17-D 1 to 17 psi range, DIN 43650 Connector
IP710-X60-D 2 to 60 psi range, DIN 43650 Connector
IP710-X100-D 2 to 100 psi range, DIN 43650 Connector
Accessories
IP610-DM DIN rail mounting kit
注釋: All IP710s come with mounting bracket and operator’s manual.
IP710-X60高精度電流/氣壓傳感器 美國omega
